Oil catchers – equipment designed for the mechanical purification of wastewater from impurities such as waste oil and oils.
Principle of operation – oil is lighter than water and as a result of sedimentation it is collected in large droplets which float to the surface of a moving stream of water.
Scope – car parks, parking lots, gas stations, viaducts, industrial & built-up areas.
To increase the purification efficiency a sedimentation technique used. At first, thin-film modules reduce the required parameters supplied to the flow rate, thus setting and stabilizing the hydrodynamic characteristics. This provides a significant reduction in the of size of the plant without reducing efficiency compared to conventional technologies which use gravitational settling and filtering through the porous elements.
Thin-film modules are made of PVC profiles. Module design provides high mechanical strength and allows efficient use of the internal volume settings, to place the necessary technological elements.
To achieve purification reset parameters in fishery reservoirs, sorbents are used.
Purification of the surfaced oils is carried out using a disposal machine via the maintenance shaft of the oil catching trap.
The plant structures are made of a helically twisted steel pipe with a double polymer coating, or of helically twisted plastic tube.
Petroleumcatchers (oil traps) are made based on standard treatment parameters or with specifically designed parameters.
Petroleumcatchers (oil traps) are delivered in full operational readiness and come equipped with hatches, anchor straps, sealing gaskets and technical wells intended for access and service facilities.
For the selection of the equipment, it is necessary to fill in a questionnaire posted on the website.
Параметры очистки: концентрация НП:
На входе – 40 мг/л
На выходе – 0,3 мг/л
|Setting||Sizes, mm||Weight, kg|